AiM Dash Loggers CAN-Bus Pigtail, 4-pin DTM, 2m

This pigtail is pre-assembled with a 4-pin Deutsch DTM receptacle connector that will allow you to plug into one of our 4-pin CAN-Bus adapters, and then provide you four loose wires that you can more easily cut to length and splice into the loose wires from the AiM dash harnesses. The wire colors of this pigtail should match all of the AiM dash harnesses, details as followed:

• Pin 1 – 0.50mm² White – CAN-High
• Pin 2 – 0.50mm² Blue – CAN-Low
• Pin 3 – 0.50mm² Black – Ground
• Pin 4 – 0.50mm² Red – Voltage Supply

Pigtail Length: 2 metres