E9x Clutch Switch Module Wire Harness

Take our advice and don’t waste your time trying to pull this wiring from a donor car or trying to find the correct BMW part numbers. This harness will allow you to easily add the Clutch Switch Module (BMW #35426876898) into your car when swapping from an automatic to manual for both proper starting procedure and functioning cruise control.

Used Clutch Switch Module (BMW #35426876898) are available here.

Connector Pinout:

1. – 0.35 mm² Brown – to Chassis Ground (loose wire – depending on the year this normally would go to either an ultrasonic splice or the ground comb splice under the pedals)
2. – 0.35 mm² Blue – to DME X60001-18 (pre-crimped pin)
3. – 0.50 mm² Violet – to CAS X13376-1 (pre-crimped pin)
4. – 0.35 mm² Black – to CAS X13376-41 (pre-crimped pin)

Notes:

 – Although the E46 and E9x use the same Clutch Switch Module, the wiring is different with different wire lengths and a different style pin at the DME connector.