BMW 2-pin Black Sealed Plug, EV1 Connector Kit

This is an alternative version than the OEM version of the EV1 connector typically used by BMW.*

BMW 2-pin Black Sealed Plug, EV1 Connector Kit Contents:

• 2-pin Black Sealed Plug, EV1 Connector
  • 3x – Pins for 0.20 – 0.50mm² wire
  • 3x – Pins for 0.50 – 1.00mm² wire
  • 3x – Seals for 1.4 – 2.1mm insulation diameter
  • 1x – Blank Plug

Application List: (partial, this connector is very common)

• BMW E46 DISA Valve
• BMW E46 E-Box Temperature Switch (MS43 Auto)
• BMW E46 Fuel Tank Vent Solenoid Valve
• BMW E46 Gear Recognition Switch (M3 Manual)
• BMW E46 Intake Air Temperature Sensor (MS43)
• BMW E46 Oil Pressure Switch
• BMW E46 Radiator Outlet Temperature Sensor
• BMW E46 Reverse Light Switch
• BMW E46 Secondary Air Pump Solenoid Valve
• BMW E46 Sucking Jet Pump Solenoid Valve (S54)
• BMW E46 Thermostat
• BMW E46 VANOS – Exhaust Solenoid Valve (non-M)
• BMW E46 VANOS – Intake Solenoid Valve (non-M)
• BMW E90 / E92 / E93 S65 Crankshaft Position Sensor
• BMW E90 / E92 / E93 S65 Oil Pressure Switch
• BMW E90 / E92 / E93 S65 VANOS – Exhaust Solenoid Valve
• BMW E90 / E92 / E93 S65 VANOS – Intake Solenoid Valve

Notes:

* This is a very common style connector that is made by several manufactures which are interchangeable (given the correct keyway), however you will need to use the corresponding pins and seals for each manufacturer’s version. If you are planning to replace a broken connector while reusing original pins you need to make sure the pins in this connector kit match the style you have.

– All items within this connector kit are genuine items sourced from authorized distributors.