E8x / E9x CAN-Bus Plug and Play Adapter, 2-pin DTM

This adapter is easily installed, requiring no splicing or cutting to the original vehicle wiring and is as close to plug and play as possible. No permanent alterations are performed and once installed, the adapter can easily be removed by simply unplugging it due to the additional parts supplied.

With this adapter, CAN-Hi, and CAN-Low are provided at a 2-pin Deutsch DTM connector. A second cable (more easily created; purchased separately or user created) is required to go from the 2-pin connector to your data logging device(s) such as AiM, Solo DL, Solo 2 DL, AEM, MoTeC, RaceCapture/Pro, etc. Please contact us if you need an additional cable created that we do not currently carry. A custom cable or kit can be created for you.

Installation instructions are available here.

Application List:

• E8x (1 series)
• E9x (3 series)
• X1 (E84)
• Z4 (E98)

Notes:

 – This adapter only provides a CAN-Bus splice. Most data logging device(s) have an internal battery to allow them to work without vehicle power. A 4-pin adapter is available that will also provide vehicle ground and power if your power demand is low (less than 5A). Otherwise this CAN-Bus only splice is suggested with separate dedicated ground and power wires to your data logging device(s).