The RaceDyne MultiBoard v1 is an extremely versatile and small PCB (30mm x 7.9mm) which can be used for many different applications and bundled directly into the wire harness.

Typical uses of this board include adding inline resistors such as in place of a sensor, CAN terminating resistors across two wires, or diodes. We use these boards in some of our thinned chassis harnesses as well as some rain light adapters.

Features:

Wire through holes to provide strain relief. The insulated portion of the wire will pass through this hole from the bottom while the wire conductor goes through the solder through hole from the top side and then soldered on the bottom side.
Allows the use of or a mixed combination of through hole or SMD items.
- 1/4 watt sized through holes.
- 1206 SMD pads.
Combination of 1/4 watt device through holes and 1206 SMD pads.

Notes:

– Each quantity ordered represents a pack of 5x MultiBoards. Example; 3x qty will equal 15 total MultiBoards.