BMW 2-pin Black Sealed Plug, EV1 (OEM Code I) Connector Kit

This is a very common connector used for many different items on BMW engines, typically referred to as an EV1 Connector as it will mate with EV1 Fuel Injectors although generally a low profile connector is used on the injectors. This same connector is also available with larger pin sizes such as E46 Reverse Light Switch Connector Kit and S54 Throttle Actuator (EDR) Motor Connector Kit, as well as for a single wire with a blank plug as E46 Oil Pressure Switch Connector Kit.

We also offer another version of an EV1 Connector which is cheaper and interchangeable.*

BMW 2-pin Black Sealed Plug, EV1 (OEM Code I) Connector Kit Contents:

• 2-pin Black Sealed Plug, EV1 (OEM Code I) Connector
  • 3x – Pins for 0.22 – 0.50mm² wire
  • 3x – Pins for 0.50 – 0.75mm² wire
  • 3x – Seals for 0.22 – 1.00mm² wire

Application List: (partial, this connector is very common)

• BMW E46 DISA Valve
• BMW E46 E-Box Temperature Switch (MS43 Auto)
• BMW E46 Fuel Tank Vent Solenoid Valve
• BMW E46 Gear Recognition Switch (M3 Manual)
• BMW E46 Intake Air Temperature Sensor (MS43)
• BMW E46 Radiator Outlet Temperature Sensor
• BMW E46 Secondary Air Pump Solenoid Valve
• BMW E46 Sucking Jet Pump Solenoid Valve (S54)
• BMW E46 Thermostat
• BMW E46 VANOS – Exhaust Solenoid Valve (non-M)
• BMW E46 VANOS – Intake Solenoid Valve (non-M)
• BMW E90 / E92 / E93 S65 Crankshaft Position Sensor
• BMW E90 / E92 / E93 S65 VANOS – Exhaust Solenoid Valve
• BMW E90 / E92 / E93 S65 VANOS – Intake Solenoid Valve

Notes:

* This is a very common style connector that is made by several manufactures which are interchangeable (given the correct keyway), however you will need to use the corresponding pins and seals for each manufacturer’s version. If you are planning to replace a broken connector while reusing original pins you need to make sure the pins in this connector kit match the style you have.

– All items within this connector kit are genuine items sourced from authorized distributors.