E46 CAN-Bus Plug and Play Adapter, 4-pin DTM, Ignition Switched

This adapter provides CAN-Hi, CAN-Low, ignition switched power, and ground to a 4-pin Deutsch DTM connector. A second cable (purchased separately or user created) is required to go from the 4-pin connector to your data logging device(s) such as AiM, Solo DL, Solo 2 DL, AEM, MoTeC, RaceCapture/Pro, etc. Please contact us if you need an additional cable created that we not currently carry. A custom cable or kit can be created for you.

Application List: Only for vehicles with Dynamic Stability Control (DSC)

• E39
• E46
• Mini (R50/R52/R53)
• Z3
• Z4 (E85/E86)

Notes:

 – This adapter splices into an existing circuit of the vehicle with approximately 2.5-3A of power available (each vehicle can vary slightly). If your device(s) will use this much power or more, please consider the 2-pin version that only provides a CAN-Bus splice, then wire separate power and ground to your device(s).

 – This adapter uses an ignition switched power source which is only powered when the key is in the ON position. Most data logging devices have an internal battery to allow them to work without vehicle power, but an adapter that utilizes always hot power is also available if you prefer.