The Problem: It appears that the most recent batch of the Genuine BMW S54 Throttle Actuator (EDR); BMW part number 13627840537 (appears to be units made in Italy by Pierburg) have been produced with the internal actuator motor wiring polarity reversed. Simply exchanging a defective unit under warranty often results in receiving another faulty actuator from the same batch. Historically, the only alternatives were risking a used unit, or having your throttle actuator rebuilt by EBM Engineering; typically with international shipping with customs to and from. That was until PHNTM Speed (huge shout out!) took the extra time to further diagnosis the issues they were having with their genuine new throttle actuator and found that the polarity of the actuator motor was reversed. View PHNTM Speed’s blog post here.
Our Solution: Instead of risking damage to delicate OEM pins and connectors, or having to re-pin your harness back to stock if BMW corrects future batches, our S54 Throttle Actuator (EDR) Polarity Reversing Plug and Play Harness solves the issue in seconds.
Simply plug this adapter inline between your factory engine harness and the new throttle actuator to safely reverse the motor polarity. If you ever install a properly wired actuator in the future, just unplug the adapter and return to stock.
- 100% Plug-and-Play: No cutting, splicing, or depinning required.
- OEM-Grade Components: Assembled with brand-new OEM connectors and factory-gauge FLRY-W automotive wire. (Note: Due to wire availability, black wire is used in place of the factory white wire; pinout functionality is identical).
- Precision Crimped: Built using professional-grade ratcheting crimpers for a secure, reliable connection in harsh engine bay environments.
- Overall Length: 3.5″
Important Notes:
– Please properly diagnose your vehicle before installation. The end user assumes full responsibility of using this item!
– Unused harnesses can be returned, but you will be responsible for return shipping and a 10% restocking fee. This way you can order this harness ahead of time and have it just incase you find out you need it when replacing the throttle actuator, rather than waiting for this to be delivered after finding out your replacement throttle actuator is defective.
– Initially we only made 4x of these but have it setup to allow back orders as we have the parts on hand to make several more of these. Ideally we would like to hear feedback from customers using these to determine if it makes more sense for these to be longer or keep them short.


Reviews
There are no reviews yet.